ATEN Technology KN1108v, KN1116v manual 158

KVM Over the NET™ User Manual

5.When you have finished making your choices, click Save.

6.In the confirmation popup that appears, click OK.

Note: In any of the columns, you can use Shift-Click or Ctrl-Click to select a group of ports to configure. Clicking to cycle through the choices on any one of the selected ports causes all of them to cycle in unison.

Filters

There are five filters at the top of the columns that allow you to expand or limit the scope of the ports that are displayed in the Name column, as described in the following table:

	Filter		Description
Name			To filter on the port name, key in the name then press Enter.
			Only the ports whose names correspond to what you have keyed
			in appear in the list.
			Wildcards (? for single characters; * for multiple characters) and
			the keyword or are supported. E.g., h*ds would return hands and
			hoods; h?nd would return hand and hind, but not hard; h*ds or
			h*ks would return hands and hooks.
Access		All	All ports appear in the list.
		Full	Only ports configured as Full Access ports appear in the list.
		Access
		View Only	Only ports configured as View Only ports appear in the list.
		No Access	Only ports configured as No Access ports appear in the list.
USB		All	All ports appear in the list.
		Full	Only ports configured as Full Access USB ports appear in the
		Access	list.
		Read Only	Only ports configured as Read Only USB ports appear in the list.
		No Access	Only ports configured as No Access USB ports appear in the list.
Config		All	All ports appear in the list.
		Permitted	Only ports configured as Permitted appear in the list.
		Restricted	Only ports configured as Restricted appear in the list.
PON		All	All ports appear in the list.
		Permitted	Only ports configured as Permitted appear in the list.
		Restricted	Only ports configured as Restricted appear in the list.

143