Chapter 8. Device Management
On the LDAP / LDAPS server, Users can be authenticated with any of the following methods:
With MS Active Directory schema.
Note: If this method is used, the LDAP schema for MS Active Directory must be extended. See LDAP Server Configuration, page 211, for details.
Without schema – Only the Usernames used on the KN1108v / KN1116v switch are matched to the names on the LDAP / LDAPS server. User privileges are the same as the ones configured on the switch.
Without schema – Only Groups in AD are matched. User privileges are the ones configured for the groups he belongs to on the switch.
Without schema – Usernames and Groups in AD are matched. User privileges are the ones configured for the User and the Groups he belongs to on the switch.
CC Management Settings
To allow authorization for the KN1108v / KN1116v switch through a CC (Control Center) server, check Enable and fill in the CC Server’s IP address and Service port in the appropriate fields. You can use the IPv4 address, the IPv6 address or the domain name in the CC Server IP field.
Note: If this function is enabled, PON devices and Blade Servers do not appear in the Sidebar, even if they are configured on the switch. This is because they are managed via the CC server.
158