KVM Over the NET™ User Manual
The Toolbar Icons
The meanings of the toolbar icons are explained in the table below.
Icon | Purpose |
Click to skip to the first accessible port on the entire installation, without having to recall the Port Access page.
Note: This function is not available on the local console Array mode.
Click to skip to the first accessible port previous to the current one, without having to recall the Port Access page.
Note: This function is not available on the local console Array mode.
Click to begin Auto Scan Mode. The KN1108v / KN1116v automatically switches among the ports that were selected for Auto Scanning with the Filter function (see Filter, page 91). This allows you to monitor their activity without having to switch among them manually.
Click to skip from the current port to the next accessible one, without having to recall the Port Access page.
Note: This function is not available on the local console Array mode.
Click to skip from the current port to the last accessible port on the entire installation, without having to recall the Port Access page.
Note: This function is not available on the local console Array mode.
Click to recall the Port Access page.
Click to close the toolbar.
Click to invoke Panel Array Mode (see Panel Array Mode, page 205).
Clicking this icon cycles you through the compensation mode choices used by the Adapter cable that connects the device to the switch. Make a choice (Short, Medium, Long), depending on the length of Cat 5e cable used for the connection. The length of the line in the icon changes to indicate which choice is selected.
201