|
| Chapter 1. Introduction |
|
|
|
|
|
|
|
|
|
No. | Component | Description |
|
|
|
1 | Power Sockets | The power cables plug in here. |
|
|
|
2 | Power | This standard slide switch powers the unit on and off. |
| Switches |
|
|
|
|
3 | PON Port | This connector is provided for a Power over the Net™ |
|
| (PON) unit which allows servers attached to the KVM Over |
|
| the NET™ switch to be booted remotely over the net. |
|
| See Single Stage Installation, page 19, step 6 for |
|
| installation details. Contact your dealer for more information |
|
| regarding PON units. |
|
|
|
4 | Secondary | This port is provided to connect to legacy serial devices via |
| Serial Port | an SA0142 adapter. |
|
|
|
5 | Secondary LAN | The cable that connects the unit to the backup network |
| Port | interface (10/100/1000 Mbps) plugs in here. |
|
|
|
6 | Grounding | The wire used to ground the unit connects here. |
| Terminal |
|
|
|
|
7 | Modem Port | For dial in connection should the unit be unavailable over |
|
| the network. See Single Stage Installation, page 19, step 7 |
|
| for installation details. |
|
|
|
8 | Primary Serial | This port is provided to connect to legacy serial devices via |
| Port | an SA0142 adapter. |
|
|
|
9 | Primary LAN | The cable that connects the unit to the primary network |
| Port | interface (10/100/1000 Mbps) plugs in here. |
|
|
|
10 | Local Console | The unit can be accessed via a local console as well as over |
| Port(s) | the Net. The local console devices (keyboard, monitor and |
|
| mouse), plug in here. Any combination of USB and PS/2 |
|
| keyboards and mice can be used. |
|
| Note: For the KN2124v, KN2140v, KN4124v and the |
|
| KN4140v units, use the |
|
| package to connect your console devices to the unit. |
|
|
|
11 | KVM Ports | The Cat 5e cables that link the unit to the KVM Adapter |
|
| Cables (which connect to the servers), plug in here. |
|
|
|
12