KVM Over the NET™ User Manual

The Java Client AP Connection Screen

A description of the Connection Screen is given in the following table:

Item

Description

 

 

Server List

Each time the JavaClient.jar file is run, it searches the User's

 

local LAN segment for KN1108v / KN1116v switches, and lists

 

whichever ones it finds in this box. If you want to connect to

 

one of these units, double-clickit. (See Connecting –

 

Windows Client AP, page 40 for details.)

 

Note: 1. The switch will not appear in the list unless its

 

Enable Device List configuration parameter has

 

been enabled. See Operating Mode, page 146 for

 

details.

 

2. Only units whose Access Port settings for Program

 

(see Service Ports, page 149) match the number

 

specified for Port in the Server area of this dialog

 

box appear in the Server List window.

 

 

Server

This area is used when you want to connect to a KN1108v /

 

KN1116v at a remote location. You can drop down the IP list

 

box and select an address from the list. If the address you

 

want isn't listed, you can key in the target IP address in the IP

 

field, and its port number in the Port field. (If you don't know

 

the port number, contact your Administrator.)

 

Š When the IP address and Port number have been

 

specified, click Connect. (See Connecting – Windows

 

Client AP, page 40 for details.)

 

Š When you have finished with your session and come back

 

to this dialog box, click Disconnect to end the connection.

 

 

Message Panel

Located just to the right of the Server panel, the Message

 

panel lists status messages regarding the connection to the

 

KN1108v / KN1116v.

 

 

Switch to Remote View

Once you have been authenticated (see Connecting –

 

Windows Client AP, page 40 for details), this button becomes

 

active. Click it to switch to the GUI Main Page. The GUI Main

 

Page is described on page 49.

 

 

43