KVM Over the NET™ User Manual

7.If you want to change any of the keystrokes, select the macro and click Edit. This brings up a dialog box similar to the one for Show. You can change the content of your keystrokes, change their order, etc.

8.Repeat the procedure for any other macros you wish to create.

Once the system macros have been created, they are available for use on a port-by-port basis. They get selected on a port’s Port Configuration → Port Properties page (see Port Level, page 120 for details).

Note: 1. Information about the Search function is given on page 63.

2.You can choose only one system macro per port.

3.Systems macros are stored on the switch, therefore macro names may not exceed 64 Bytes; hotkey combinations may not exceed 256 Bytes. (Each key usually takes 3–5 Bytes.)

65