Chapter 8. Device Management
General
The General section of the Device Information page displays the name of the selected device, its firmware version, and information about its network configuration.
Note: The AP GUI version presents the same information as the Browser version. Scroll through the list to see the additional entries.
Operating Mode
The Operating Mode page is used to set working parameters, as described below:
If Force all to grayscale is enabled, the remote displays of all devices connected to the KN1108v / KN1116v switch are changed to grayscale. This can speed up I/O transfer in low bandwidth situations.
If Enable Client AP Device List is enabled, the switch appears in the Server List when using the WinClient or Java Client AP (see Windows Client AP Login, page 38, and Java Client AP Login, page 42). If this option is not enabled, the switch can still be connected to, but its name will not appear in the Server List.
If Enable First Logon Transfer is enabled, only the first user on a bus can switch ports. Other users on the bus cannot switch ports unless there is a bus that is already connected to the port they would like to access, or there is a free bus available. (For details regarding users and buses, see Users and Buses, page 208.)
146