ATEN Technology KN1108v, KN1116v Super Administrator Setup

Chapter 3

Super Administrator Setup

Overview

This chapter discusses the administrative procedures that the Super Administrator performs to get the KN1108v / KN1116v set up for the first time.

First Time Setup

Once the KN1108v / KN1116v has been cabled up, the Super Administrator needs to set the unit up for user operation. This involves setting the network parameters, and changing the default Super Administrator login. The most convenient way to do this for the first time is from the local console, though it can also be done remotely.

Note: For remote methods of setting up the network, see IP Address Determination, page 237.

After the local console has been connected (see Single Stage Installation, page 19), and the KN1108v / KN1116v turned on, a login prompt appears on the console monitor:

Since this is the first time you are logging in, use the default Username: administrator; and the default Password: password.

Note: For security purposes, you should change these to a unique Username and Password. (See Changing the Super Administrator Login, page 32 for details.)

29