KVM Over the NET™ User Manual
Additional Mouse Synchronization Procedures
If you use Manual Mouse Synchronization, you should perform the following operations on the servers that connect to the switch.
Note: 1. These procedures are to be performed on the servers attached to the switch’s ports - not on the client computer you are using to access the KVM Over the NET™ switch.
2.In order for the local and remote mice to synchronize, you must use the generic mouse driver supplied with the Windows operating system. If you have a third party driver installed - such as one supplied by the mouse manufacturer - you must remove it.
Windows:
1.Windows 2000:
a)Open the Mouse Properties dialog box (Control Panel → Mouse → Mouse Properties)
b)Click the Motion tab
c)Set the mouse speed to the middle position (6 units in from the left)
d)Set the mouse acceleration to None
249