ATI Technologies X1550 SERIES manual Apply your settings, Restore default settings, Click Defaults

Monitor Properties 51

Apply your settings

1Click Apply to save your changes and leave the Catalyst™ Control Center open.

2Click OK to save your changes and exit the Catalyst™ Control Center.

Restore default settings

1Move the mouse to the bottom right-hand corner of the window.

2Click Defaults.

Note: Clicking Defaults will restore the defaults for the current view only. Previous settings are not altered and will be saved once you click OK.

Discard your settings

•Click Discard to ignore any unsaved changes and restore the settings that existed when the Catalyst™ Control Center was opened or the last time Apply was used. Discard does not close the Catalyst™ Control Center.

Clicking Discard applies to all features of an aspect, not just the feature in the current view.

Digital Panel Properties

Use the Digital Panel Properties aspect to configure the DVI settings and Image Scaling to improve image quality without impacting performance. Use HDTV Support to add EDID information (containing information about the capabilities of the display) about your connected HDTV display to the Force button in Displays Manager.

Catalyst™ Control Center loads aspects dynamically based on what device is attached to the graphics card. If you have standard display device such as a CRT monitor or flat panel display Monitor Properties will appear instead of Digital Panel Properties. The latter is designed for use with such devices as HDTV displays.