ATI Technologies X1550 SERIES Select a deinterlacing mode, Click Deinterlacing, Click Defaults

84 Standard Settings

•Auto Detect lets the multimedia driver to select the best deinterlacing scheme for different video sources and sizes.

•Bob deinterlacing, when selected, removes every other line of the video image and is recommended for motion video.

•Adaptive deinterlacing, when selected, reacts to the amount of motion in the video and apply a media filter on a motion block and apply weave on the remaining blocks.

•Motion Adaptive deinterlacing, when selected, applies the advanced motion detection to deinterlace the video.

•Weave does not apply any deinterlacing.

Select a deinterlacing mode

1From the Tree View pane, expand Video.

2Click Deinterlacing.

3Select a deinterlacing mode for the drop-down menu.

Apply your settings

1Click Apply to save your changes and leave the Catalyst™ Control Center open.

2Click OK to save your changes and exit the Catalyst™ Control Center.

Restore default settings

1Move the mouse to the bottom right-hand corner of the window.

2Click Defaults.

Note: Clicking Defaults will restore the defaults for the current view only. Previous settings are not altered and will be saved once you click OK.

Discard your settings

•Click Discard to ignore any unsaved changes and restore the settings that existed when the Catalyst™ Control Center was opened or the last time Apply was used. Discard does not close the Catalyst™ Control Center.

Clicking Discard applies to all features of an aspect, not just the feature in the current view.