ATI Technologies X1550 SERIES Adjust the DVI Settings, Click Attributes, Apply your settings

Monitor Properties 53

Note: Use centered timings will not resize the desktop to fit the screen, and may result in a centered image with a black border around it.

Adjust the DVI Settings

1From the Tree View pane, expand Digital Panel Properties.

2Click Attributes.

3Under DVI Settings, click to enable the desired setting.

Note: Reducing DVI frequency on high-resolution displays can resolve either display corruption or the complete absence of any image when a display is set to a high resolution. This should only be enabled if the Digital Panel is experiencing these types of problems.

Note: Alternate DVI operational mode, when enabled, may eliminate display corruption.

Apply your settings

1Click Apply to save your changes and leave the Catalyst™ Control Center open.

2Click OK to save your changes and exit the Catalyst™ Control Center.

Restore default settings

1Move the mouse to the bottom right-hand corner of the window.

2Click Defaults.

Note: Clicking Defaults will restore the defaults for the current view only. Previous settings are not altered and will be saved once you click OK.

Discard your settings

•Click Discard to ignore any unsaved changes and restore the settings that existed when the Catalyst™ Control Center was opened or the last time Apply was used. Discard does not close the Catalyst™ Control Center.

Clicking Discard applies to all features of an aspect, not just the feature in the current view.