ATI Technologies X1550 SERIES manual Set the Anisotropic Filtering to automated preference

64 Anisotropic Filtering

3Ensure the application override is disabled. To do so, make sure the Let the Application Decide check box is cleared. The slider control will become available.

4Click the Control slider and move the selector to your preferred setting:

•To increase processing performance, move the slider to the left.

•To increase image quality, move the slider to the right.

Set the Anisotropic Filtering to automated preference

1From the Tree View pane, expand 3D.

2Click Anisotropic Filtering.

3Ensure the application override is enabled. To do so, make sure the Let the Application Decide check box is selected.

Note: The slider control becomes unavailable.

Set higher quality Anisotropic Filtering

1From the Tree View pane, expand 3D.

2Click Anisotropic Filtering.

3Select Enable High Quality AF.

Note: Enabling this feature may impact performance.

Note: This feature is not supported by all ATI graphics cards.

Preview your changes

• The preview image automatically displays your adjustments.

Optionally, double-click 3D Preview for a full-screen view of the adjustments you have made. To exit full-screen Preview, press the Esc key.

The Preview can be disabled by clicking the “X” button in the Preview pane. It can also be paused by clicking the “” button in the Preview pane. Clicking the pause button again causes the preview to resume.

Apply your settings

1Click Apply to save your changes and leave the Catalyst™ Control Center open.

2Click OK to save your changes and exit the Catalyst™ Control Center.