ATI Technologies X1550 SERIES Preview your changes, Apply your settings, Discard your settings

60 Standard Settings

2Click Standard Settings.

3If necessary, remove the check mark from Use custom settings.

4Click and drag the Control slider to the left to select High or Optimal Performance, or to the right to select High or Optimal Quality.

Preview your changes

• The preview image automatically displays your adjustments.

Optionally, double-click 3D Preview for a full-screen view of the adjustments you have made. To exit full-screen Preview, press the Esc key.

The Preview can be disabled by clicking the “X” button in the Preview pane. It can also be paused by clicking the “” button in the Preview pane. Clicking the pause button again causes the preview to resume.

Apply your settings

1Click Apply to save your changes and leave the Catalyst™ Control Center open.

2Click OK to save your changes and exit the Catalyst™ Control Center.

Discard your settings

•Click Discard to ignore any unsaved changes and restore the settings that existed when the Catalyst™ Control Center was opened or the last time Apply was used. Discard does not close the Catalyst™ Control Center.

Clicking Discard applies to all features of an aspect, not just the feature in the current view.

Restore default settings

1Move the mouse to the bottom right-hand corner of the window.

2Click Defaults.

Note: Clicking Defaults will restore the defaults for the current view only. Previous settings are not altered and will be saved once you click OK.