ATI Technologies X1550 SERIES Monitor Properties, Apply your settings, Discard your settings

Monitor Properties 49

Apply your settings

1Click Apply to save your changes and leave the Catalyst™ Control Center open.

2Click OK to save your changes and exit the Catalyst™ Control Center.

Discard your settings

•Click Discard to ignore any unsaved changes and restore the settings that existed when the Catalyst™ Control Center was opened or the last time Apply was used. Discard does not close the Catalyst™ Control Center.

Clicking Discard applies to all features of an aspect, not just the feature in the current view.

Restore default settings

1Move the mouse to the bottom right-hand corner of the window.

2Click Defaults.

Note: Clicking Defaults will restore the defaults for the current view only. Previous settings are not altered and will be saved once you click OK.

Monitor Properties

Use the Monitor Properties aspect to configure your Display Data Channel (DDC) monitor’s attributes, to display information about the connected monitor, and adjust the output display’s position and size.

Note: Catalyst™ Control Center loads aspects dynamically based on what device is attached to the graphics card. If you have a display device other than a standard monitor or flat panel display (such as an HDTV screen) Digital Panel Properties will appear in the Graphics Settings listing instead of Monitor Properties.