ATI Technologies X1550 SERIES Set video aspect ratio, Click Theater Mode, Apply your settings

Standard Settings 83

•Optionally, select in Theater Mode (full-screen)if you want the video content to be displayed on both displays. The Secondary display displays the same content as the primary.

Set video aspect ratio

1From the Tree View pane, expand Video.

2Click Theater Mode.

3Select Match the source video to maintain the aspect ratio of original video.

•Optionally, select Scale to full-screento have the source video fill the display area.

Apply your settings

1Click Apply to save your changes and leave the Catalyst™ Control Center open.

2Click OK to save your changes and exit the Catalyst™ Control Center.

Restore default settings

1Move the mouse to the bottom right-hand corner of the window.

2Click Defaults.

Note: Clicking Defaults will restore the defaults for the current view only. Previous settings are not altered and will be saved once you click OK.

Discard your settings

•Click Discard to ignore any unsaved changes and restore the settings that existed when the Catalyst™ Control Center was opened or the last time Apply was used. Discard does not close the Catalyst™ Control Center.

Clicking Discard applies to all features of an aspect, not just the feature in the current view.

Deinterlacing

Deinterlacing creates a sharp image from the two video fields of interlaced video. Select one of five options for deinterlacing video for better viewing.