ATN ATN NVM14 manual Mounting Procedures, Mounting the ATN NVM-14 to the Weapon

3.1 MOUNTING PROCEDURES

CAUTION

It is recommended that the eyecup be replaced with the eyeguard during weapon-mounted use.

NOTE

The ATN NVM-14 is not a weapon sight, however, it can be used in conjunction with a collimated dot sight or laser aiming device.

A. MOUNTING THE ATN NVM-14 TO THE WEAPON

To mount the ATN NVM-14 perform the following:

1.Loosen the clamping knob on the weapon mount. Position the monocular mount on the weapon’s mounting rail, adjust the fore/aft position of the monocular as necessary by loosening the clamping knob and repositioning the weapon mount on the rail. Tighten by turning the clamping knob (see figure 3-1).

Figure 3-1

Attaching Weapon Mount to Weapon

3-2