Modem On Hold | 27 |
Configuring Modem On Hold |
3If you do not want the Modem On Hold feature enabled, select Disconnect call. Switch to voice.
When the modem detects an incoming voice call during an Internet connection, it disconnects the Internet connection so that you can answer the voice call.
4If Modem On Hold is enabled, you can select or clear the Enable Caller ID check box to match your telephone service.
5To disable the warning that displays before the Modem On Hold timer expires (disconnecting an incoming or outgoing voice call if not completed), clear the Warn before timeout check box.
6To change the Modem On Hold warning timer value, select a value from the Warn before timeout dropdown box.
You can set the timer from 10 to 60 seconds, in intervals of 10 seconds.
7If your phone system requires a number to be dialed to switch between voice and data calls, enter that number in the To switch between calls, dial box.
If your phone system requires one number to switch from voice to data and a different number to switch from data to voice, enter both numbers in the box, separated by a comma.
8Click OK to close the dialog and save your changes.