78

AT Commands

AT command formats

+PIG Command

This command enables or disables PCM upstream. You can also use this command to display the current PCM upstream configuration, and to display the supported +PIG command parameter values.

+PIG=<value>

Valid <value> parameter values are as follows:

0Enables PCM upstream.

1Disables PCM upstream. This is the default.

Result Codes:

OK

<value> = 0,1

ERROR Otherwise

+PIG?

This command displays the current +PIG command configuration.

+PIG=?

This command displays the supported +PIG <value> parameter values.