AT Commands | 65 |
AT command formats |
Zn Recall stored profile
The modem performs a soft reset and restores (recalls) a configuration profile according to the parameter supplied. You can store two configuration profiles. If no parameter is specified, zero is assumed.
Z0 | Reset and restore stored profile 0. |
Z1 | Reset and restore stored profile 1. |
Result Codes:
OK n=0,1
ERROR Otherwise
&Cn Data Carrier Detect (DCD) control
Data Carrier Detect is a signal from the modem to the computer indicating that a carrier signal is being received from a remote modem. DCD normally turns off when the modem no longer detects the carrier signal.
&C0 | The state of the carrier from the remote modem |
| is ignored. DCD circuit is always on. |
&C1 | DCD turns on when the remote modem’s carrier |
| signal is detected, and off when the carrier |
| signal is not detected (default). |
Result Codes:
OK n=0,1
ERROR Otherwise