76 | AT Commands |
AT command formats |
<max_rate> The maximum receive rate. If set to 0, then the max rate will be determined by the modulation means selected in the <carrier> and <automode> settings. Zero is the default. Valid <max_rate> values are from 300 to 57333. Maximum receive rates for each valid <carrier> are as follows, in bits per second:
V92
V90
V34
V32B
V32
V22bis 2400
V22 2200
Bell212A 1200
V23C 1200
V.21 300
Bell103 300
Example: +MS=V92,1,0,0
This sets the modulation to be V.92 and the speed negotiations to use automode. This is the modem default.
Example: +MS=V90,0,0,45333
This will limit the maximum speed to 45,333 bps in V.90 mode.
+MS?
This command displays the current +MS command configuration.
+MS=?
This command displays all supported values for each +MS command parameter.