Audiovox CDM9900 owner manual Call Waiting, Three-Way Calling, Sending Tones

Call Waiting

If you have Call Waiting service, you may hear a beep tone when you are on a call alerting you of an incoming call. “New Caller” is displayed along with the new caller’s name and number.

1.To answer the new call, press VAD .

2.To switch between the two calls, press VAD again.

Three-Way Calling

Three-Way Calling allows you to call a third party when a call is already in progress. This service is system dependent.

1.To call the third party, enter a number and press VAD .

2.To connect all three parties, press VAD again.

Sending Tones

There are three ways to send tone signals to the party during a call.

Sending Tones from Keypad

When “DTMF Send (Menu 716)” (page 100) is on, tone signals are sent to the party as you press digit keys during a call.

Sending Tones from Display

To send tone signals from the display during a call when “DTMF Send (Menu 716)” (page 100) is off:

1.Enter the number during a call.

2.Press the right softkey under Options , select Send Tone then

press .

Sending Tones from Memory

To send tone signals from the phonebook memory during a call:

1.Press the left softkey under Menu during a call, select Phone-

book then press to find a number.

2.Select the number you want to send in tone signals then press the

right softkey under Options . Select Send Tone then press .

Chapter 2 33