Prepending Dialing

Convenient for adding an area code to a number from the phonebook.

1.From the standby mode, press the right softkey under Contacts .

2.To display the details screen, select the entry then press .

3.Select the phone number then press the right softkey under

Options .

4.Select Prepend Dial then press .

5.When Prepend Dial screen appears, enter the digits you want to add, then press VAD to dial.

Note: Added digits are only applied for the current call.

Dialing Numbers with Pauses

To dial a phone number with hard pause (P):

1.From the standby mode, press the right softkey under Contacts .

2.Select the entry then press to display the details screen.

3.Select the number then press VAD . The phone number will be dialed.

4.Press VAD again. The additional number will be sent in tone signals.

5.Succeeding numbers can be sent sequentially by pressing VAD .

To dial a phone number with two-second pause (T):

1.From the standby mode, press the right softkey under Contacts .

2.Select the entry then press to display the details screen.

3.Select the number then press VAD . The phone number will be dialed. With two-second pause, the additional number will auto- matically be sent in tone signals.

Note: To save phone numbers with pauses, see “Digits Options” on page 44.

Chapter 3

47

Page 49
Image 49
Audiovox CDM9900 owner manual Prepending Dialing, Dialing Numbers with Pauses