Audiovox CDM9900 owner manual Sound Settings, Volume Settings Menu, Ringer Type Menu

Sound Settings

Volume Settings (Menu 711)

To adjust the ringer, key beep, earpiece or speakerphone volume:

1. Press the left softkey under Menu then press 7 1 1 .

2.Select one of the categories listed below, then press . Select:

♦Ringer Volume for adjusting ringer volume.

♦Key Volume for adjusting key beep volume.

♦Earpiece Volume for adjusting earpiece volume.

♦Speaker Volume for adjusting speakerphone volume.

3.Adjust the volume level with or then press .

♦Level 1-5:Sets the volume level (1 to 5).

♦Silent: Mutes the ringer or key beep. (Only appears in Ringer and Key Volume settings.)

Tip: You can use the volume keys on the side of your phone to adjust the ringer volume in standby mode (or the earpiece volume during a call).

Note: When the ringer volume is set to Silent (indicated by the icon ), the ringer tone will not sound for an incoming call. However, if Au- tomatic Answering is ON, the ringer tone will sound at the lowest available volume.

Ringer Type (Menu 712)

To select a ringer tone pattern for incoming calls:

1. Press the left softkey under Menu then press 7 1 2 .

2.Select Media Gallery or Voice Notes then press .

♦Media Gallery: Includes ringer tones, alarm tones, melodies, other tones and downloaded melodies.

♦Voice Notes: Includes voices you have recorded. See “Record- ing Voice Notes” on page 124.

98Chapter 8