STEP 14-ATTACH LP CYLINDER TO GRILL - (ALL MODELS)
•Fill empty LP Cylinder at your local LP gas supplier.
•Set bottom ring of LP Cylinder into Cylinder Bracket through round hole in Bottom Shelf (Fig. K ). Turn Adjusting Knob clockwise to secure LP Cylinder inside Cylinder Bracket(Fig. K).
•Turn all control knobs and LP Cylinder valve to the “Off” position.
•Take the protective cap off the cylinder valve. (Fig. L) Hold Regulator in a straight line with LP Cylinder valve so the connection does not cross thread. Insert nipple into the cylinder valve. Hand tighten coupling nut in clockwise direction. Do not use tools.
•Make sure Regulator hose does not contact hot metal surfaces.
WARNING: Do not use grill if this connection can not be completed. Be sure to test this connection for gas leaks before operation of Gas Grill.
ROUTE HOSE UNDER | ROUTE HOSE ON |
BRACE ON MODELS | OUTSIDE OF LEG ON |
WITH WOODEN LEGS | ALL MODELS |
LP
CYLINDER 
FIG. K
ADJUSTING 
KNOB
|
| LP GAS |
|
| VALVE |
REGULATOR | ||
|
|
|
|
|
|
FIG. L
TURN REGULATOR COUPLING |
|
| |
PROTECTIVE CAP | |||
NUT CLOCKWISE TO TIGHTEN |
| ||
|
| ||
|
|
|
23
