STEP 2- FIXED LEG/SIDE TABLE ASSEMBLY TOOLS:
|
|
|
|
|
|
|
|
|
|
|
| OR |
|
|
|
|
|
|
|
|
(ITEM 1, 3, OR 4) SIDE TABLE |
|
| (ITEM 9) 8 pcs | |||
|
|
| (ITEM 10) 8 pcs |
|
| |
|
|
| 1/4” x 1 3/8” BOLT |
|
| 1/4” x 1” BOLT |
|
|
|
|
|
|
|
(ITEM 12) FRONT FIXED LEG - WOOD
(ITEM 14) FRONT FIXED LEG - METAL
OR
|
| (ITEM 13) REAR FIXED LEG - METAL |
(ITEM 11) REAR FIXED LEG - WOOD | ||
|
|
|
•In the same way, attach the Front and Rear Fixed Legs to the remaining Side Table using 1/4” x 1” Bolts (1/4” x 1 3/8” for Metal Legs.)
•On models with wooden legs, be sure to position Fixed Legs with the four large recessed holes facing away from Side Table (Fig. C) and the two threaded holes in edge of each leg pointing outward. (Fig. D) Do not tighten bolts completely. (Metal Tubing Legs can be oriented either way.)
FRONT FIXED LEG
KANGA, BONZA - WOOD
BONZA DELUXE - METAL
SIDE TABLE
(Tear Drop Table
Shown)
REAR FIXED LEG
KANGA, BONZA - WOOD
BONZA DELUXE - METAL
FIG. C
FOUR LARGE RECESSED HOLES (Wooden Legs Only)
1/4” x 1” BOLT
(1/4” x 1 3/8” Deluxe Models)
FRONT FIXED LEG THREE VELCRO PATCHES FACE INSIDE
FIG. D
THREADED HOLES IN LEGS (Deluxed Models with Metal legs do not have these threaded holes.)
10
