•Fit venturi end of Burner through hole in the inside firewall (behind control panel) and onto Gas Control Valve Nozzle (Fig. G & Fig. H). Be careful not to bend or force gas collector plates.
Holes in
Front firewall.
|
| Manual Lighting | |
Gas Nozzle | |||
| Holes | ||
Control Vavle |
| ||
|
| ||
|
|
| |
|
|
|
Gas Collector and
Electrode
Venturi end of Burner inserted over gas nozzle.
Top plate
of gas collector.
FIG. G |
| FIG. H |
|
|
|
|
|
|
.
REFERENCE: ELECTRODE GAP
Adjust Tab if greater than 3/16”.
ELECTRODE | 3/16” GAP |
| |
| MAX. |
BURNER
•Place other end of burner on lower shoulder of rear firewall so Burner Peg rests in Burner Locator Hole as shown (Fig. I).
•Using Pliers, insert Cotter Pin through hole in Burner Peg to secure. This is easier done from backside of grill looking up underneath rear firewall.
•Repeat above steps for remaining burners .
FIG. I
BURNER PEG
BURNER LOCATOR HOLE IN LOWER SHOULDER
COTTER PIN Install from underneath Backside of grill.
19
