Aussie Bonza Deluxe Bottom Shelf/Leg & Caster Assembly, Tools, securing Fixed Leg assembly

STEP 4-BOTTOM SHELF/LEG & CASTER ASSEMBLY TOOLS:

(ITEM 9) 4 pcs 1/4” x 1” BOLT

(ITEM 22) 1/4” X 2” BOLT 4 pcs

		(ITEM 17 OR 18) AXLE
(ITEM 10) 8 pcs
1/4” X 1 3/8” BOLT
(DELUXE MODELS)
	(ITEM 16) BOTTOM SHELF

(ITEM 19, 20, 21)

CASTER ASSEMBLY

•Place Leg/Side Table assemblies opposite each other as shown with the velcro patches on same side. •Place Bottom Shelf inside of Wheel Leg assembly and align large axle holes. Insert Axle through axle holes in both sides of legs and shelf. The Axle will support this end of Bottom Shelf while

securing Fixed Leg assembly.

•For Kanga and Bonza Models, position Caster Assembly with caster wheels up and side of bracket against Bottom Shelf. Align the Caster Bracket, Bottom Shelf, and Fixed Leg holes and

fasten using 1/4” X 2” Bolts. Attach Wheel Legs to Bottom Shelf using 1/4” x 1” Bolts. Metal Tubing Legs will use 1/4” x 1 3/8” Bolts. Tighten Wheel Leg bolts before proceeding.

•For Bonza Deluxe, align the Bottom Shelf and Leg holes and fasten using 1/4” x 1 3/8” bolts. Attach Bonza Deluxe Wheel Legs the same way. Thread casters into end of leg.

•Bonza Deluxe - Important Note: When assembling Bottom Shelf on metal legs, the Axle hole in the Bottom Shelf is not used(See Illustration below).

DELUXE

METAL LEG

WHEEL LEG

ASSEMBLY

1/4” x 1” BOLT - WOOD LEG 1/4” x 1 3/8” BOLT - METAL

BOTTOM SHELF

AXLE

VELCRO

PATCHES

ON THIS

SIDE

1/4” x 2” BOLT - WOOD 1/4” X 1 3/8” BOLT - METAL

CASTER	DELUXE
ASSEMBLY
	CASTER
	METAL
	LEG

FIXED LEG

ASSEMBLY

1/4” x 1” BOLT - WOOD LEG 1/4” x 1 3/8” BOLT - METAL LEG

12