Avaya 4600 manual File too large

Error Messages

Table 16: Possible Error Messages During Installation or Operation of 4600 Series IP Telephones (continued)

Error Message	Cause/Resolution
Discovering...	CAUSE: The telephone is seeking a gatekeeper on the
	media server, using its administered gatekeeper list.
	RESOLUTION: Wait for a valid registration to occur, or
	press # to interrupt the search and re-initialize manual or
	DHCP/script files procedures.
File too large	CAUSE: The telephone does not have sufficient room to
Cannot save file	store the downloaded file.
	RESOLUTION: Verify the proper filename is administered
	in the script file, and that the proper application file is
	located in the appropriate location on the file server.
Gateway Error	CAUSE: DEFINITY Release 8.4 does not have an H.323
	station extension for this telephone.
	RESOLUTION: On the station administration screen,
	ensure the DCP set being aliased for this IP telephone has
	an H.323 station extension administered, in accordance
	with switch administration instructions.
Hardware failure	CAUSE: Hardware failure prevented downloading of
	application file.
	RESOLUTION: Replace telephone.
IP Address in use by	CAUSE: The telephone has detected an IP address
another	conflict.
	RESOLUTION: Verify administration to identify duplicate
	IP address(es).
NAPT Error	CAUSE: A device between the telephone and the call
	server is invoking Network Address Port Translation, which
	the 4600 Series IP Telephones do not support.
	RESOLUTION: Remove or re-administer the NAPT device
	or move the telephone.
No Ethernet	CAUSE: When first plugged in, the IP telephone is unable
	to communicate with the Ethernet.
	RESOLUTION: Verify the connection to the Ethernet jack,
	verify the jack is Category 5, etc. Note that if the telephone
	is attached to a 30A switched hub, upon loss of Ethernet
	connectivity, the usual “No Ethernet” message is not
	displayed.
	2 of 6

Issue 4 August 2006 143