Aruba Mobility Controller | Configuration Guide |
| VIEW Certified |
CLI Commands | Required Settings | Default | Description | |
Settings | ||||
|
|
| ||
|
|
|
| |
| 0 | As per the environment. This | ||
|
|
| need not be set if ARM is | |
|
|
| enabled. | |
|
|
|
| |
Channel <x> |
| 1 | This is the channel assigned to | |
|
|
| the radio. Need not be set if | |
|
|
| ARM is enabled. | |
|
|
|
| |
802.11b/g rates | These rates should be | 5,11 |
| |
| determined from RF site |
|
| |
| survey. Verify you have |
|
| |
| sufficient coverage to support |
|
| |
| data rates. |
|
| |
|
|
|
| |
802.11b/g Tx rates | These rates should be | 1,2,5,11 | The supported Tx rates for | |
| determined from RF site |
| 802.11b/g. | |
| survey. Verify you have |
|
| |
| sufficient coverage to support |
|
| |
| data rates. |
|
| |
|
|
|
| |
802.11b/g rates (if | These rates should be | 5,11 |
| |
all wireless client | determined from RF site |
|
| |
are 802.11g) | survey. Verify you have |
|
| |
| sufficient coverage to support |
|
| |
| data rates. |
|
| |
|
|
|
| |
802.11b/g Tx rates | These rates should be | 1,2,5,11 |
| |
(if all wireless client | determined from RF site |
|
| |
are 802.11g) | survey. Verify you have |
|
| |
| sufficient coverage to support |
|
| |
| data rates. |
|
| |
|
|
|
| |
802.11a rates | These rates should be | 6,9,12,24 |
| |
| determined from RF site |
|
| |
| survey. Verify you have |
|
| |
| sufficient coverage to support |
|
| |
| data rates. |
|
| |
|
|
|
| |
802.11a Tx rates | These rates should be | 6,9,12,18,24, | The supported Tx rates for | |
| determined from RF site | 36,48,54 | 802.11a. | |
| survey. Verify you have |
|
| |
| sufficient coverage to support |
|
| |
| data rates. |
|
| |
|
|
|
| |
ESSID | <voice ssid as configured> | Aruba | This is the ESSID that the voice | |
|
|
| devices would associate with. | |
|
|
|
|
Page 10
