Aruba Mobility Controller | Configuration Guide |
| VIEW Certified |
11.Click the 802.11 a tab.
12.For Max Retries, enter 2 for voice.
13.For the DTIM period, enter 3.
14.For Basic Rates and Supported Rates, consult the facilities RF site survey to determine if coverage is sufficient to support all data rates.
15.To assign the power and channel setting manually:
a.For ARM Assignment, select Disabled.
b.Clear the ARM Scanning check box.
c.Set the Default Channel and Initial Transmit Power from their
16.For Mode, click the
17.Click the Apply button.
Page 13
