5
CHAPTER
2
Installation
Getting Started
Before installing your AutoView 2000 switch, refer to the following list to ensure you have all items that shipped with the appliance as well as other items necessary for proper installation.
Supplied with the AutoView 2000 switch
•AutoView 2000 switch
•Power cord
•One null modem serial cable
•Rack mounting kit
•AutoView 2000 Installer/User Guide
•AutoView 2000 Quick Installation Guide
Additional items needed
One AVRIQ module and UTP cabling per attached server or switch
Rack Mounting Your AutoView 2000 Switch
Your AutoView 2000 switch may be rack mounted using brackets supplied in your rack mounting kit. Before installing the appliance and other components in the rack cabinet (if not already installed), stabilize the rack in a permanent location. Install your equipment starting at the bottom of the rack cabinet, then work to the top. Avoid uneven loading or overloading of rack cabinets.