Chapter 3: Basic Operations

19

 

 

Figure 3.4: Name Modify Dialog Box

2.Type a name in the New Name box. Names of servers may be up to 15 characters long. Legal characters include: A to Z, a to z, 0 to 9, space and hyphen.

3.Click OK to transfer the new name to the Names dialog box. Your selection is not saved until you click OK in the Names dialog box.

4.Repeat steps 1 to 3 for each server in the system.

5.Click OK in the Names dialog box to save your changes. -or-

Click X or press Escape to exit the dialog box without saving changes.

NOTE: If an AVRIQ module has not been assigned a name, the EID is used as the default name.

Assigning device types

The AutoView 2000 switch automatically discovers cascaded KVM switches, but you will need to specify the number of ports on the cascaded switch through the Devices dialog box. You will see an Sw-8 or Sw-24 display in the Type category for the cascaded switch. Select the switch from the list and the Modify button displays, allowing you to assign it the appropriate number of ports.

NOTE: The Modify button will only be available if a configurable switch is selected.

To access the Devices dialog box:

1.Press Print Screen to launch the OSCAR interface. The Main dialog box will appear.

2.Click Setup - Devices. The Devices dialog box displays.