Chapter 2: Installation

7

 

 

CAUTION: To reduce the risk of electric shock or damage to your equipment -

-Do not disable the power cord grounding plug. The grounding plug is an important safety feature.

-Plug the power cord into a grounded (earthed) outlet that is easily accessible at all times.

-Disconnect the power from the unit by unplugging the power cord from either the electrical outlet or the unit.

Analog User B

Configuration Port

(for updating firmware)

AutoView 2000 Switch

Servers 2-16

Analog User A

AVRIQ Module

Server 1

Figure 2.2: Basic AutoView 2000 Switch Configuration

To connect an AVRIQ module to each server:

1.Locate the AVRIQ modules for your AutoView 2000 switch.