Chapter 3: Basic Operations

23

 

 

4.In Display Mode, select Opaque for a solid color flag or select Transparent to see the desktop through the flag.

5.To position the status flag on the desktop:

a.Click Set Position to gain access to the Set Position Flag screen.

b.Left-click on the title bar and drag to the desired location.

c.Right-click to return to the Flag dialog box.

Figure 3.9: Set Position Flag

NOTE: Changes made to the flag position are not saved until you click OK in the Flag dialog box.

6.Click OK to save settings. -or-

Click X to exit without saving changes.

Setting console security

The OSCAR interface enables you to set security on your analog port console. You can establish a screen saver mode that engages after your console remains unused for a specified Inactivity Time. Once engaged, your console will remain locked until you press any key or move the mouse. You will then need to type in your password to continue.

Use the Security dialog box to lock your console with password protection, set or change your password and enable the screen saver.

NOTE: If a password has been previously set, you will have to enter the password before you can access the Security dialog box.

To access the Security dialog box:

1.Press Print Screen to launch the OSCAR interface. The Main dialog box will appear.

2.Click Setup - Security. The Security dialog box displays.