24AutoView 2000 Installer/User Guide
Figure 3.10: Security Dialog Box
To set or change the password:
1.
2.Type the new password in the New text box and press Enter.
Passwords must contain both alpha and numeric characters, are case sensitive and may be up to 12 characters long. Legal characters are: A to Z, a to z, Ø to 9, space and hyphen.
3.In the Repeat box, type the password again and press Enter.
4.Click OK to change only your password, and then close the dialog box.
NOTE: If you should lose or forget your password, please contact Avocent Technical Support about returning your switch for service. See Appendix C:Technical Support for contact information.
To password protect your console:
1.Set your password as described in the previous procedure.
2.Select Enable Screen Saver.
3.Type the number of minutes for Inactivity Time (from 1 to 99) to delay activation of password protection and the screen saver feature.
4.For Mode, select Energy if your monitor is ENERGY STAR® compliant; otherwise select Screen.
CAUTION: Monitor damage can result from the use of Energy mode with monitors not compliant with
ENERGY STAR®.
5.(Optional) Click Test to activate the screen saver test which lasts 10 seconds then returns you to the Security dialog box.
6.Click OK.
To log in to your console:
1.Press any key or move the mouse.