5

 

CHAPTER

Installation and Configuration

 

 

 

 

 

2

 

 

Hardware Overview

Figure 2.1 shows the front panel of a CCM4850 appliance.

Figure 2.1: CCM4850 Appliance Front Panel

The front panel contains the 48 serial port connectors. The lower left area of the front panel contains the following LEDs, buttons and connectors:

•The ONLINE LED illuminates steadily (not blinking) when the CCM self-test and initializa- tion procedures complete successfully.

•The POWER LED illuminates when the CCM appliance is connected to a power source and the power switch is on ().

•The RESET button reboots the CCM appliance when pressed.

•The INIT button restores the CCM factory defaults when pressed and held. See Reinitializing the CCM Appliance on page 9.

•A console device may be connected to the RJ-45 CONSOLE PORT.

•A 10BaseT, 100BaseT or 1000BaseT interface cable may be connected to the LAN PORT.

•Two LEDs adjacent to the LAN PORT (SPEED and LINK/TRAFFIC) indicate the link speed and whether there is traffic on the link. Table 2.1 describes the possible values.

Table 2.1: LAN LED Values

SPEED LED

LINK/TRAFFIC LED

Description

 

 

 

Off

Off

No link

 

 

 

Off

On

Link at 10 Mbps