66CCM4850 Installer/User Guide
Table 5.33: User Add Command (Continued)
Parameter | Description |
|
|
| |
| Command and port access rights or level. You may specify multiple access rights, | |
| separated by commas, or a level. Valid values for access rights are: | |
| P<n> | Access to the specified port number. |
| Access to the specified range of ports. | |
| PALL | Access to all ports. |
| USER | User configuration access rights. |
| PCON | Port configuration access rights. |
ACCESS=<access> | SCON | Configuration access rights. |
| SMON | Monitor access rights. |
| BREAK | Can issue Port Break command. |
| Valid values for access levels are: | |
| ADMIN | PALL, USER, SMON, PCON and BREAK access rights. |
| APPLIANCEADMIN | PALL, USER, SCON, SMON, PCON and BREAK |
| Default = PALL,SMON | access rights. |
|
| |
|
|
|
Examples
The following command adds the username JohnDoe, with the password secretname, access to ports 2, 5, 6 and 7 and user and monitor access rights.
> user add JohnDoe password=secretname
The following command adds the username JaneDoe, with access to all ports. The name of the SSH public user key file is ccm_key2.pub. This file is located on the FTP server at IP address 10.0.0.3.
> user add JaneDoe ssh=ccm_key2.pub ftp=10.0.0.3 access=pall
The following command adds the username JDoe and gives that user the Appliance Administrator access level, which enables access to all ports and CCM appliance commands.
> user add JDoe access=applianceadmin
User Delete commandThe User Delete command removes a username entry from the CCM user database. The username may no longer be used to authenticate a session with the CCM appliance. If the specified user is currently logged in, a message is output to the user, indicating that access is no longer permitted, and the Telnet session is terminated.
Access right: USER
Access level: ADMIN or APPLIANCEADMIN
Syntax
USER DEL <username>
Table 5.34: User Delete Command Parameter
ParameterDescription
<username> | Username to be deleted. |
|
|