Chapter 5: CCM Appliance Commands

53

 

 

Table 5.13: Server RADIUS Command Parameters (Continued)

Parameter

Description

 

 

 

UDP port for RADIUS authentication server, in the range 1-65535. This value is

AUTHPORT=<udp>

usually 1645, but may be 1812.

 

Default = 1645

 

 

TIMEOUT=<time-out>

Number of seconds to wait for a response from the RADIUS server, in the range 1-60.

Default = 5

 

 

 

RETRIES = <retry>

Number of attempts to make to authenticate a user after a time-out, in the range 1-10.

Default = 3

 

 

 

DELETE

Deletes the RADIUS server definition.

 

 

Examples

The following command specifies primary RADIUS server information; default values will be used for the UDP port, time-out and retries values.

>ser radius primary ip=192.168.0.200 secret=ThePrimaryRadSecret user- rights=86

The following command deletes the primary RADIUS server definition.

> ser radius primary del

Server Reboot command

The Server Reboot command reboots the CCM appliance. During a reboot, any active Telnet sessions, including your own, are terminated, and all users are informed accordingly. Any configuration changes that require a reboot will become effective when the reboot completes.

When you enter this command, you are prompted to confirm or cancel the reboot.

Access right: SCON

Access level: APPLIANCEADMIN

Syntax

SERVER REBOOT

Server Security command

The Server Security command specifies the authentication method, enables/disables access methods and enables/disables security lock-out. For more information, see Using Authentication Methods on page 23, Enabling plain text Telnet and SSH connections on page 18 and Using security lock-outon page 25.

When you enter this command, you are prompted to confirm or cancel the specified information.

Access right: SCON

Access level: APPLIANCEADMIN