68CCM4850 Installer/User Guide
Table 5.36: User Set Command Parameters (Continued)
Parameter | Description |
| |
|
| ||
KEY=<sshkey> | Uuencoded SSH key. To delete an SSH key (whether it was originally specified with | ||
the SSHKEY and FTPIP parameters or with the KEY parameter), specify Key=“”. | |||
| |||
|
| ||
| Command and port access rights or level. You may specify multiple access rights, | ||
| separated by commas, or a level. If specifying access rights, you may use one of | ||
| three forms: |
| |
| ACCESS=<access> to specify all access rights. | ||
| ACCESS=+<access> to specify only access rights to be added. | ||
| |||
| Valid values for access rights are: | ||
| P<n> | Access to the specified port number. | |
| Access to the specified range of ports. | ||
ACCESS=<access> | PALL | Access to all ports. | |
USER | User configuration access rights. | ||
| |||
| PCON | Port configuration access rights. | |
| SCON | Configuration access rights. | |
| SMON | Monitor access rights. | |
| BREAK | Can issue Port Break command. | |
| Valid values for access levels are: | ||
| ADMIN | PALL, USER, SMON, PCON and BREAK access rights. | |
| APPLIANCEADMIN | PALL, USER, SCON, SMON, PCON and BREAK | |
| Default = PALL,SMON | access rights. | |
|
| ||
|
|
| |
Examples
The following command sets the access rights for JohnDoe, enabling access to all ports with configuration and monitoring access rights.
>user set JohnDoe access=pall,scon,smon
The following command removes the server configuration access right for JohnDoe, and leaves other access rights intact.
> user set JohnDoe
The following command deletes the SSH key information for JohnDoe. The command will complete successfully only if JohnDoe has a password configured in a previous User Add or User Set command, and if there are other users with User access rights.
> user set key=“”
User Unlock commandThe User Unlock command unlocks a user who was previously
Access right: USER
Access level: ADMIN (may unlock all except APPLIANCEADMIN) or APPLIANCEADMIN