60CCM4850 Installer/User Guide
Table 5.24: Show Port Command Display Fields (Continued)
Field | Content | |
|
| |
Power | Device power status, if monitoring is enabled. ON indicates the device is on, OFF | |
indicates the device is off. If monitoring is disabled, this field is blank. | ||
| ||
|
| |
Toggle ** | Toggle value (from Port Set command). | |
|
| |
Power Signal ** | Signal and state being monitored for device power status (from Port Set command). | |
|
| |
Logical name ** | Port name assigned with the Port Set command or the default name (last three | |
octets of MAC address plus the port number). | ||
| ||
|
| |
User * | Username (from User Add command). | |
|
| |
Level * | User’s access level (from User Add and User Set Access commands). | |
|
| |
Access * | User’s access rights (from User Add and User Set Access commands). | |
|
| |
Duration * | Duration of user’s session. |
*Displayed only when the command specifies a single port that is currently being accessed.
**Displayed only when the command specifies a single port that is not being accessed.
Show Port Alert commandThe Show Port Alert command displays a port’s alert strings.
Access right: SMON
Access level: ADMIN or APPLIANCEADMIN
Syntax
SHOW PORT <port> ALERT
Table 5.25: Show Port Alert Command Parameter
ParameterDescription
<port> | Port number in the range |
|
|
The Show Server command displays CCM appliance configuration information and statistics.
Access right: SMON
Access level: ADMIN or APPLIANCEADMIN
Syntax
SHOW SERVER