Chapter 5: CCM Appliance Commands

57

 

 

Syntax

SERVER SNMP TRAP [ENABLEDISABLE] [ALL]

Table 5.19: Server SNMP Trap Command Parameter

ParameterDescription

Enable generates a numbered list of currently disabled traps from which you choose

ENABLEDISABLE those to enable. Disable generates a numbered list of currently enabled traps from which you choose those to disable.

Example

The following command enables the linkUp, userDeleted and userLogin SNMP traps.

server snmp trap enable

Traps now disabled:

userLogin

1)

linkUp

4)

2)

userAdded

5)

imageUpgradeStarted

3)

userDeleted

 

 

Select trap(s) to enable>1,3-4

Server SNMP Trap Destination command

The Server SNMP Trap Destination command defines or deletes destinations for enabled SNMP traps. Once you define destinations for enabled SNMP traps, when a trap occurs, the CCM appliance will generate SNMP trap messages to each defined SNMP trap destination. You may define up to four trap destinations, using separate commands.

For more information, see Managing the CCM Appliance Using SNMP on page 28.

Access right: SCON

Access level: APPLIANCEADMIN

Syntax

SERVER SNMP TRAP DESTINATION ADDDELETE <ip_address>

Table 5.20: Server SNMP Trap Destination Command Parameters

Parameter

Description

 

 

ADDDELETE

Defines or deletes the specified destination.

 

 

<ip_address>

IP address of trap destination.

 

 

Server SSH command

The Server SSH command enables or disables SSH session access to the CCM appliance and specifies the SSH authentication method. When you enable SSH, all CCM sessions will be