Chapter 5: CCM Appliance Commands

49

 

 

 

 

 

Table 5.9: Server Command Summary (Continued)

 

 

 

 

 

 

 

 

Command

Description

 

 

 

 

 

 

 

 

Server SNMP Trap

Enables/disables SNMP traps.

 

 

Server SNMP Trap

Defines/deletes destinations for enabled SNMP traps.

Destination

 

 

 

Server SSH

Enables/disables SSH session access to the CCM appliance and specifies the

SSH authentication method.

 

 

 

Server CLI command

The Server CLI command:

•Specifies the console port type

•Specifies the CLI access character

•Enables or disables device connection from the console port

•Specifies a modem initialization string

•Specifies port history mode operations

•Specifies a port time-out value

At least one parameter must be specified.

Access right: SCON

Access level: APPLIANCEADMIN

Syntax

SERVER CLI [TYPE=<type>] [CHAR=^<char>] [CONNECT=ONOFF] [HISTORY=HOLDAUTO,CLEARKEEP] [MODEMINIT=“<string>”] [TIMEOUT=<time-out>]

Table 5.10: Server CLI Command Parameters

ParameterDescription

Terminal type to be used on the console port. The entire name of the type must

TYPE=<type>be specified; abbreviations are not permitted. Valid types are: ASCII, VT52, VT100, VT102, VT220 and VT320.

Default: ASCII

CLI access character in the range A through _ (underscore). (The allowable ASCII range is 0x41-0x5F and 0x61-0x7A.) The CLI access character, when pressed simultaneously with the Ctrl key during a session with an attached

CHAR=^<char> serial device, will suspend the session with the device and place you in CLI command mode. This value will be used if a port’s Port Set command contains a Char=None parameter.

Default = ^d