Avocent CCM4850 Show Port command

Chapter 5: CCM Appliance Commands 59

Table 5.22: Show Command Summary (Continued)

Command	Description
Show Server SNMP	Displays SNMP configuration information.
Show User	Displays user configuration and session information.

Show Port command

The Show Port command displays configuration and status information about one or all ports.

Access right: SMON

Access level: ADMIN or APPLIANCEADMIN

Syntax

SHOW PORT [<port>ALLNAMES]

The SHOW PORT NAMES command display includes the port numbers and names. If a port has not been given a name with a Port Set command, the default name is displayed. A default name contains the last three octets of the MAC address plus the port number.

Table 5.23: Show Port Command Parameter

Parameter	Description
<port>	Either a port number in the range 1-48 or CON.
	Default = your port
ALL	Displays information about all ports.
NAMES	Displays port numbers and associated logical names.

Table 5.24 lists the display fields for a Show Port command that specifies one or all ports.

Table 5.24: Show Port Command Display Fields

Field	Content
Port	Port number.
	Comma-separated string of port values: baud rate, number of bits, parity, stop bits,
Serial Port Settings	flow control, socket number, time-out value and CLI access character (from Port Set
	command). The CLI character is preceded by POR CLI= if it was defined with a Port
	Set command or by SER CLI= if it was defined with a Server CLI command.
TX Bytes	Number of bytes transmitted.
RX Bytes	Number of bytes received.
Errors	Number of TX/RX parity and framing errors.