50CCM4850 Installer/User Guide

Table 5.10: Server CLI Command Parameters (Continued)

Parameter

Description

 

 

 

Enables or disables the ability to use the Connect command from the console

 

port. When enabled, a console port user may use the Connect command to

CONNECT=ONOFF

establish a connection to the serial device attached to another CCM appliance

serial port. When disabled, you cannot use the Connect command from the

 

 

console port.

 

Default = ON

 

 

 

Port history file processing options during connection (Hold or Auto) and when a

 

session ends (Clear or Keep):

 

Hold

Upon connection you are informed of how much data is in the history

 

 

buffer, but the data is not displayed.

HISTORY=HOLDAUTO,

Auto

Upon connection you are informed of how much data is in the history

CLEARKEEP

 

buffer, and it is then displayed.

 

Clear

The history buffer’s content is cleared when a session ends.

 

Keep

The history buffer’s content is retained when a session ends.

 

You cannot specify both Clear and Keep or both Hold and Auto.

 

Default = HOLD,CLEAR

 

 

 

Modem initialization string, enclosed in quotation marks. Must contain at least

MODEMINIT=“<string>”

ATV1 and S0=1.

 

Default = “” (no modem is attached to the console port)

 

Number of time-out minutes in the range 0-90. If no data is received or

 

transmitted during a Telnet session for the specified period, the session will time-

TIMEOUT=<time-out>

out. A zero value indicates no time-out. This value is used for any CCM port that

does not have a time-out value set with the Port Set command, during a Telnet

 

 

session to port 23 or an SSH session to port 22.

 

Default = 15 minutes

 

 

Server FLASH command

The Server FLASH command updates the CCM appliance program images in FLASH memory. You may wish to use this command to update the program with new features or to install a later release.

There are two program images that you may update in the CCM appliance FLASH. The boot image file (ccm50bt.img) contains the CCM appliance startup and self-test logic. The application image (ccm50app.img) contains the program that provides CCM appliance functionality.

You will need a TFTP server. Download the latest FLASH image from the Equinox web site, www.equinox.com, and save the image file to the appropriate directory on the TFTP server.

NOTE: Powering down a system in the middle of a boot FLASH update may render the unit inoperable. To update the bootstrap, it is recommended that the unit be placed on a UPS under controlled conditions to avoid interruption of the boot FLASH update process.

Access right: SCON

Access level: APPLIANCEADMIN