AXIS
Scheduled Events
A Scheduled event can be activated at preset times, in a repeating pattern on selected days.
Configuration example:
1.Click Add scheduled on the Event types page.
2.Enter a descriptive name for the event, e.g. “Scheduled
3.Set the priority (High, Normal or Low).
4.Set the Activation Time parameters (24h clock) when the event will be active, e.g. start on Sundays at 13.00 with a duration of 12 hours.
5.Set the When Activated... parameters, i.e. set what the camera will do at the specified time, e.g. send uploaded images to an
6.Click OK to save the Event in the Event Types list.
Please see the online help 
for descriptions of each available option.
Camera Tampering (AXIS 209 FD-R/FD-R M12)
The camera tampering application, which is currently available only for the AXIS 209
You must also create an event, see How to set up a triggered event, on page 21, for the camera to send an alarm.
Note: Once you have set up camera tampering correctly, if you significantly change the area in front of the camera, i.e., 90% of the area must have been changed, an alarm will be triggered.
For example, if you have set up your Axis camera to monitor a room and you move furniture, pictures, change wall paper etc. so that you have changed nearly the entire appearance of the room, an alarm will be triggered.
The settings available are:
Minimum duration - This sets the minimum tampering period, i.e., an alarm will not be triggered until this period has elapsed, even if the tampering conditions are otherwise met. This can help prevent false alarms for known conditions that affect the image.
Alarm for dark images - If the camera lens is sprayed and the image is darkened, it will not be possible to distinguish this from other situations where the same effect is seen, i.e. when the lighting conditions change. When this is enabled, alarms will be generated for all cases where the image turns dark or the lens is sprayed.
