B&B Electronics MES1B, MES1A manual Navigating the Configuration Menu, Unit ID to IP Address Table

Configuring the MES1A/B

Navigating the Configuration Menu

On initial power-up there are four sections in the MES1A/B configuration menu. A fifth menu item appears if you are configuring a Modbus Master device. The menu items are:

6.Network/IP Settings

7.Serial & Mode Settings

8.Modem/Configurable Pin Settings

9.Advanced Modbus Protocol Settings

The following menu item 5) appears if the MES1A/B is configured as a

Modbus Master in section 2) Serial Protocol

10. Unit ID to IP Address Table

Each section of the configuration menu includes several parameters.

11.Begin the configuration by typing the menu section number at the

Select Command or parameter set (1..4) to change: prompt.

The first configuration parameter of the section will appear at the bottom of the pane. The current setting is shown in brackets.

Example:

Figure 15. Setting the IP Address

Manual Documentation Number: MES1A/MES1B-2106m PN7138-rev001

B&B Electronics Mfg Co Inc – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax 815-433-5104 – www.bb-elec.comB&B Electronics Ltd – Westlink Commercial Park – Oranmore, Galway, Ireland – Ph +353 91-792444 – Fax +353 91-792445 – www.bb-europe.com

20