Hardware Overview
Link LED
When the Link LED located on the Ethernet jack is illuminated it indicates that a connection (link integrity) has been established between the converter and the network. Its color is green if connected to a 100BaseT network; orange if connected to a 10BaseT network. It turns orange briefly during the power up process.
Activity LED
When the Activity LED located on the Ethernet jack is flashing (green) it indicates data is being sent across the network. This LED turns orange briefly during the power up process.
LED | Color/Status | Function | |
|
|
|
|
Power | Red |
| Power applied |
|
|
|
|
Link | Orange |
| Bootup, 10BaseT |
Green |
| 100BaseT | |
|
| ||
|
|
| |
Activity | Green (Blinking) | Data on the network | |
Orange |
| Bootup | |
|
| ||
|
|
|
|
| Figure 3. | LED Status Table | |
Reset Switch
The Reset switch is accessible on the top edge of the MES1A/B (same edge as the power supply connector) through a small hole in the MES1A/B enclosure. It allows you to reset the MES1A/B by inserting a small tool through the hole and pressing the momentary switch for about 1 second. The MES1A/B restarts with its last saved configuration settings.
Manual Documentation Number: |
B&B Electronics Mfg Co Inc – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph
4
