Default Configuration Settings
Appendix A: Default Configuration Settings
IP Address: | 0.0.0.0 /DHCP/BOOTP/AutoIP | |
|
| |
Gateway IP Address: | Not set | |
|
| |
Netmask: | Not set | |
|
| |
Telnet Configuration Password: | Not set | |
|
| |
Attached Device: | Slave | |
|
| |
Serial Protocol: | Modbus/RTU, Slave | |
|
| |
Interface Type: | MES1A – | |
MES1B – | ||
| ||
Serial Parameters: | 9600, 8, N, 1 | |
|
| |
CP1 Function: | MES1A - Not used | |
MES1B – | ||
| ||
CP2 Function: | Not used | |
CP3 Function: | Not used | |
Slave Address: | 0 (auto maps to 1) | |
Allow Modbus Broadcasts: | 2 (no) | |
Use MB/TCP 00BH/00AH Exception Responses: | 2 (yes) | |
Disable Modbus/TCP pipeline: | 1 (no) | |
|
| |
Character Timeout: | 50 milliseconds | |
|
| |
Message Timeout: | 5000 milliseconds | |
|
| |
Serial TX delay after RX: | 0 milliseconds | |
|
| |
Swap 4x/0H to get 3x/1x: | No | |
|
|
Manual Documentation Number: |
B&B Electronics Mfg Co Inc – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph
B&B Electronics Ltd – Westlink Commercial Park – Oranmore, Galway, Ireland – Ph +353
51
