B&B Electronics MES1A, MES1B manual Getting Started, QuickStart

Getting Started

Chapter 3: Getting Started

QuickStart

The following section is a quick, step-by-step procedure that will assist you to get started configuring the MES1A/B. Additional details on how to use the Device Installer software to discover and connect to devices is included in the section following this one. MES1A/B configuration details are included in Chapter 4.

1.Check the contents of your MES1A/B package. It should contain…

‰The MES1A or MES1B unit

‰A printed version of this user manual

‰A printed version of the MES1A/B Quick Start Guide

‰Software CD with Device Installer software, this manual, Quick Start guide

2.Set up the Hardware

‰Connect the MES1A/B to the network using an Ethernet cable.

‰Connect your PC to the network

‰Connect a 12 VDC power supply (not included) to the MES1A/B and apply power. (10 to 30 VDC, 3.6 Watts.)

3.Software Installation

‰Insert the software CD and it should auto-start into the installation wizard.

‰Follow the on-screen installation wizard to install the Device Installer software.

Manual Documentation Number: MES1A/MES1B-2106m PN7138-rev001

B&B Electronics Mfg Co Inc – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax 815-433-5104 – www.bb-elec.comB&B Electronics Ltd – Westlink Commercial Park – Oranmore, Galway, Ireland – Ph +353 91-792444 – Fax +353 91-792445 – www.bb- europe.com

11